Reverse water recovery equipment：
When organic matter in sewage is oxidized by biodegradation, organic nitrogen is converted into ammonia nitrogen. The wastewater treated by activated sludge treatment has a considerable amount of ammonia nitrogen discharged into the water, which can lead to eutrophication of water body. If water is water, it will increase the difficulty and cost of water treatment. Therefore, the discharge of secondary treatment sometimes requires nitrogen removal treatment. There are two major categories of denitrification: chemical and biological.
1 chemical nitrogen removal
The method used to remove ammonia nitrogen has the method of blowing, folding and chlorine and ion exchange.
They are mainly used in the internal control of factories, and are seldom used in urban sewage treatment plants.
(1) to remove method
Ammonia nitrogen in wastewater can be blown off in the gaseous state.
In wastewater, NH3 and NH4+ coexist with the following balance states:
NH3 + H2O = NH4 + + OH -
This balance is affected by pH value, and when the pH is 10.5 ~ 11.5, the ammonia in the waste water is saturated, so it is necessary to add lime.
The blowoff process involves raising the pH value of the wastewater to 10.5 ~ 11.5, and then aerating it, which is the process of the process of the deep treatment of the urban sewage in the tower, the removal of nitrogen and phosphorus.
This process is strongly influenced by temperature, with the decreasing of temperature, to achieve the rapid increase of the quantity of air required for the same treatment effect by using lime adjust pH value, calcium carbonate scaling happens in the blowoff tower, affect the operation.
In addition, the release of NH3 will cause air pollution.
Therefore, there have been many improvements to the process, such as the absorption of NH3 by the gas through H2SO4.
(2) fold point plus chlorine
In water purification engineering, chloramine is used as chemical compound nitrogen, hypochloric acid as residual chlorine, all have the bactericidal action.
 the depth of the municipal sewage treatment - nitrogen and phosphorus removal on the way A, B two fold point A point before the residual chlorine is basically chloramine, point B according to this, fold point after the residual chlorine is basically free chloride (free chlorine) used in the denitrification rate of chlorine quantity the fold point corresponding chlorine quantity shall prevail.
The best advantage of this method is that the ammonia nitrogen in the water can be completely removed by proper control.
In order to reduce the amount of chlorine, this method is often used with biological nitrification, with the removal of trace of ammonia nitrogen.
(3) ion exchange method
When ammonia nitrogen is removed by ion exchange method, natural ion exchangers are commonly used, such as zeolite.
Compared with synthetic resins, natural ion exchangers are cheaper and can be regenerated with lime.
The application of synthetic resin, pretreatment process and regeneration system is complicated, and the resin life is short and the application is limited.
A. Custom service: we provide customized services according to customer's requirements.
B. Extensive production experience: we specialize in water treatment equipment and have 10 years' experience.
C. Our technicians will develop maintenance plans for the equipment and track them regularly to ensure that their work is normal.
D. High quality raw material: choose the American GE, dow reverse osmosis membrane, Japan can Hyde international brands, such as ultrafiltration membrane we mainly choose guodian longyuan brands, electrical components selection: Siemens, mitsubishi, schneider, Taiwan sp, pipeline valve ring choose Taiwan qi, Watson, America PLX and other well-known brands at home and abroad.
E. Strict production process: meet the requirements of product design and process, and provide reliable test data.
F. Short delivery time: according to the equipment model, we provide fast delivery and installation services.
G. Safe packaging: all supporting parts are packed in paper bags and the equipment is sealed with winding film to ensure the safe arrival of the site.
Finally, container transport suitable for sea transport.
H. Best after-sales service: more than 60% of our products are exported to southeast Asia, Africa and Taiwan. All products are trusted by customers at home and abroad.
Parts of customers:
1.How can I get to your factory?
Our factory is near Shanghai airport. We can meet you at the airport.
2.Are you a manufacturer, a trading company or a third party?
We are a manufacturer and we have established our company since 2007.
3.Where is your factory?
Our factory address: no.5, rongqiang road, xishan district, jiangsu province, China
4.If I need to stay in your place for a few days, can you book a hotel for me?
I am very happy that hotel reservation service is available..
5.What's your minimum order quantity, could you send me the sample?
Our minimum quantity is one set, because our products are mechanical equipment, which can hardly be sent to you, but we can send you a catalogue and warmly welcome you to visit our company.
6.What's the delivery time for your machine?
Generally speaking, the delivery time of our machines is about 30 days, and the customized machines will negotiate with our customers.
7.Can this machine be customized according to our needs?Like our logo?
Of course, our machine can be customized according to your needs, your logo can also be used.
Please feel free to send us your detailed requirements, you would be satisfied with our service.
Company: Wuxi Blue Sky Water Treatment Equipment Co., Ltd.
Add: No 5,rongqiang Road, Wuxi city, Jiangsu Prov, china
remarks：Main Equipments Packages Testing Devices Delivery:
500kg or more