4. High-pressure water pumpThe whole reverse osmosis water treatment process requires some pressure.The high pressure pump provides pressure to the entire water treatment system to ensure the speed and water supply requirements of who passes through the membrane hole.The high pressure pump must adopt the special stainless steel pump, which is resistant to corrosion, because the acidic and alkaline substances contained in the water treatment solution will corrode. If the anti-corrosion ability is weak and corroded, the water will be so polluted.
5. Intelligent control systemThe new reverse osmosis equipment will be equipped with a dedicated PLC intelligent control system.Check the data change of instrument panel such as temperature gauge and pressure gauge by intelligent system.Controlled by computer, with an analog screen.Be able to control the normal operation of the whole reverse osmosis equipment.Besides, manually set the reference water according to the need of water treatment, and give an alarm prompt according to the operating condition of the equipment.
6. Seal the water storage tankAfter the reverse osmosis equipment has finished the water treatment, the treated water should be collected through the professional water tank.The water tank should be clean and anti-corrosion to avoid water pollution.Folding aid systemOther auxiliary systems such as ozone sterilization system, lamp testing, filling system.Still can use ultraviolet ray to come bactericidal, ultraviolet ray won't have remain, abroad has a lot of like to use ultraviolet ray