Home > Knowledge > Content

Quality and cheap microporous membrane filter?

Apr 11, 2018

The Chinese manufacturer's stainless steel cover membrane filters are suitable for most particles and are widely used in precision filters and sterilization.

1.The filter cartridge is 1 iron core, 3 core, 5 core, 7 core, 9 core, 11 core, 13 core, 15 core.

2.The length of the folded filter is 10,20,30,40.

3.The filter element is PTF, pply, nylon, pp, acetyl cellulose.

4.The diameter of filter hole is 0.1 meters, 0.22 meters, 0.45 meters, 1 meter and 3 meters, 5 meters, 10 meters, 30 meters, 6000 meters, according to your requirements, it is a selective water (gas) and hydrophilic (suitable for liquid).

Advantages of products


Using mechanical polishing, material liquid contact area Ra<0.4, the absolute fitness level of polishing, all series electrolytic polishing can be selected.

- can effectively increase the exhaust port and hole diameter and connect the 8 mm tube.

- the drain valve is independent of the exhaust valve thread joint and the pagoda, which is more convenient to operate.

- using segmented clips, 20 percent higher than the normal clamp pressure, with the maximum pressure reaching 1.0 Mpa.

The supporting foot adopts the reinforced thread, not easy to slide the teeth;

Install adjustable nut at the bottom of the leg and the height of the filter can be adjusted.