Home > Knowledge > Content

Precautions for using filter press in summer

Mar 03, 2021

In summer, the temperature and humidity are high. Due to the overheating of equipment during operation, many equipment and equipment are overloaded, and filter presses are no exception. When using the filter press in summer, it is important to pay attention to the operating status of the filter press to prevent damage caused by overload operation from affecting the filter press. So, what should you pay attention to during use?

First, we focus on the hydraulic system. Since the equipment will repeatedly pressurize the filter plate during the working process, the hydraulic system will work frequently and bear the huge pressure on the filter plate. The weather is hot and the hydraulic device is easy to overheat. Since the hydraulic unit itself is a highly enclosed component, some simple cooling methods are not ideal for the hydraulic system. Therefore, when using the filter press in summer, we should always pay attention to changes and minimize equipment overload.

Second, the temperature of the hydraulic oil will rise. Due to the hot summer weather and work, the temperature of the hydraulic oil will continue to rise. When the temperature reaches a very high temperature, the hydraulic oil will evaporate less, which will also cause structural changes between the hydraulic oil molecules, thereby producing oil. The volume is not very stable. The volume of hydraulic oil changes with the change of receiving pressure and cannot be used for equipment pressure.

Finally, prevent the filter plate from being oxidized by direct sunlight. The filter plate of a filter press is usually made of polypropylene plastic material, which means that the filter plate is made of plastic material. When exposed to the sun, it will accelerate the change of oxygen molecules in the air, causing the plastic filter plate to oxidize, deteriorate, harden, and break, and the filter plate is easily damaged, resulting in an increase in the cost of the filter press.

Filter press filter protection line, when using the filter press in summer, pay attention to protect the electronic circuit to prevent rupture due to high temperature oxidation.

In short, when using filter press equipment in summer, in addition to paying special attention to the operation and control of filter press equipment, it is also necessary to protect various components, take measures to reduce the temperature and prevent oxidation, so as to ensure the filter press throughout the summer. is using. It can run normally and safely.