Home > Knowledge > Content

How to deal with electroplating wastewater?

Mar 09, 2018

1 physical method

Physical treatment in waste water is a state of suspension of pollutants by using their own physical sedimentation separation removal way, the material in the whole process of physical and chemical properties do not change, mainly including evaporation concentration method, chromatography.

Evaporation enrichment is the process of reducing the moisture in the bath by evaporation, so as to achieve the solution of concentrated solution and recovery and utilization.

It is commonly used to treat wastewater containing chromium, copper and nickel ions.

The crystallization method is to use the solid-liquid separation principle to precipitate the metal salt in the saturated solution of the salts in the form of crystals to achieve the purpose of removing or recycling the valuable materials.

Electroplating wastewater reuse equipment .jpg

2 chemical methods

Cic chemical methods is to waste water and chemicals, abolish the toxicity of pollutants, change its physicochemical properties, target pollutants or turned into non-toxic harmless material is easy to be separated from water, in order to achieve the purpose of the removal of contaminants.

The commonly used chemical methods include oxidation treatment, reduction treatment, neutralization treatment, flocculation sedimentation, etc., and the combination of several methods is legal.

(1) reduction method

Reduction method is mainly aimed at the wastewater containing chromium electroplating wastewater, chromium in waste water is mainly exist and Cr3, Cr6, + + two forms, under acid condition, Cr6, + the reducing effect by reducing agent into first Cr3, +, in alkaline conditions, after chromium hydroxide precipitate removal is generated by neutralization precipitation, often using ferrous sulfate, sodium bisulfite, sodium bisulfite, sodium metabisulfite reductant.

The main advantage of this method is that the equipment is simple, easy to operate and management, the sludge sediment is small and easy to be recycled, so it is widely used, and the disadvantage is that it may cause secondary pollution.

(2) oxidation

Oxidation method is mainly used to deal with cyanide wastewater, mainly alkaline chlorination, electrolysis oxidation, hydrogen peroxide oxidation and ozone oxidation.